The standard Starlink mounting options in the kit may not always be enough for some people.
This mostly happens if the roof portions or grounds of our place do not provide ideal mounting spots, probably due to obstructions.
If this is the case with you, you may need to consider other mount types.
You may need to find a mount tailored to your conditions, as it is key to the quality of your internet service. This is why you should keep your cards open when considering a mount for your Starlink dish.
Why Different Mounting Options Are Important?
Where you mount your Starlink dish goes a long way to determine the quality of internet access you get.
To get a strong internet reception, your dish must enjoy an unobstructed view of the sky above it.
This is so the dish can communicate seamlessly with the satellites in low-earth orbit overhead.
Starlink designs its standard mount to work without incident on the grounds or roof around your house.
However, the nature of obstructions around your house may prevent you from using these options.
You may need to start looking towards different mounting options from third-party vendors.
The height and angle your dish assumes on the mount are also key to the quality of service you enjoy.
This informs the need to mount your dish correctly, and it starts by using the right type of mount.
(A fleet of Satellites)
Starlink Mounting Options
You can use any of the various mounting options provided by Starlink and available at different aftermarket and third-party vendors. They include the following:
J-Mount
The J-Mount counts as one of the most versatile, affordable, and available mount types around.
It usually has a round slot that your dish can plug into. Also you can ways use a pipe adapter to adapt your Starlink Satellite dish for any diameter of slot provided 8n your J-Mount.
Flashing Mount
A flashing Mount slots in the spaces between successive shingles on your roof. It usually comes installed with a J-Mount or Pivot mount attached to it.
You can order a Flashing mount directly from Starlink. You can now go to an aftermarket seller to find the additional Pivot mount that you’ll install along with it.
A flashing Mount on your roof will look neat and trendy. However, you would still need to site it in a spot free of roof leaks and overhangs or jots from Fascia, roof parapets, and porches.
Non-penetrating Roof Mount
A non-penetrating Roof Mount is, as its name implies, a roof mount that does not penetrate the ground when mounted.
This mount type does not rely on bolts or any provisional attachments to fasten to its mounting surface.
You can use heavy objects to hold it down in a position of your choice. One major downside to this mount type is the lack of fixity or rigidity.
Heavy rains and high winds can easily upturn or push it off your roof.
(A starlink hardware kit besides a laptop)
Tower Mount
Tower mounts have the advantage of almost always being the tallest object in your house.
This means a tower mount can raise your dish to a height above every other object and, as such, can enjoy an uno structured view.
It is one of the most expensive mount types and arguably the most complex.
Pole Mount
A pole Mount allows your dish to extend as many meters above the ground as you wish.
You can bury the end of the pole so the mount can stand firmly and withstand the pressure of sway.
The other end will receive the Starlink Satellite dish before hoisting it in position.
The Pole mount comes in handy, especially with uneven terrains or one surrounded by tall trees.
You can get this pole Mount from the official Starlink store or resort to third-party vendors.
(A satellite dish mounted on a roof)
Tripod Mount
A Tripod mount provides a simple and everyday means to mount your Starlink dish, especially if you’re considering mounting on a flat surface.
With non-flat surfaces providing an even, smooth surface to mount, a Tripod mount will hold up quite nicely around your house.
It works well for temporary accommodation, in Recreational vehicles (RV), or in houses you can’t drill or nail into.
You can always dig the roof of the Tripod mount into the ground to make it sturdy.
Chimney Mount
Chimney mounts offer a decent option if you need more height and clearance from obstructions.
You can fasten, screw, tie, or clamp this mount to your Chimney so you can enjoy an uno-structured view of the sky.
(A starlink dish in orbit around the earth)
Other Mounting Options Worth Considering
If you’re still not satisfied with all the mount types discussed here, you’ll need to get a bit creative and improvise.
Using your materials, you can build a mount that works for your home, given your peculiar obstruction. Issues.
You can use brackets and pipes to fabricate special mounts. Also, you may order specially fabricated clasps and holders and get pipe sizings and adapters to boot.
With the right tools and skills, you should be able to build a mount that suits your grounds.
If you need something simpler, try various custom pipe and pole mounts that raise your dish considerably above your room.
You can also just stick with the standard mount in your Starlink kit and work out the best way to use it.
(A Starlink dish is shown)
Conclusion
The type of mount you use and how you mount your dish affects the strength of your internet reception.
This is why you need to be careful while choosing a mount and using it. You should be able to find the mount that works best for you from the options available from Starlink and other third-party vendors.